Top 10 typical forklift crashes ， forklift procedure must focus on these issues ！.

Top 10 typical forklift crashes ， forklift procedure must focus on these issues ！.

Blog Article

Do not underestimate the forklift at the workplace. If the operation is bad, there will be serious accidents in minutes, and there are several accidents entailing forklifts.

Case 1: The forklift freight blocked the motorist's view, and the individual ahead could not be discovered, resulting in a rolling accident.
Situation 2: In order to maintain the equilibrium of the forklift when lifting heavy products, the employees utilized their body weight as the counterweight, which nearly caused casualties.
Instance 3: The width of the forklift freight exceeds the allowed width of the path and holds on the roadside rack, which nearly causes an crash.
Instance 4: Forklift is speeding and rolls over throughout a turn.
Situation 5: The forklift vehicle driver did not discover the pedestrian, and the pedestrian did not see the forklift.
Case 6: The forklift raises the personnel illegally, the forklift vehicle driver does not wear the safety belt, the forklift lifter falls and the vehicle driver is squashed when the forklift rolls over.
Situation 7: The forklift driver did not wear a seat belt and fell from the automobile when it surrendered and was squashed.
Forklift procedure need to pay attention to these issues ：.

Begin.
1. Prior to beginning, observe the environments, and after validating that there are no challenges that impede the safety of driving, honk the horn first and after that begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge should be risk-free before starting.
3. When the forklift starts with a tons, the motorist must initially confirm that the tons is stable and dependable.
4. The beginning has to be sluggish and constant.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the mast must be tilted in reverse. .
2. Do not lift the fork too expensive when driving. When getting in and leaving the job site or while driving, beware that there will certainly be no challenges in the sky. When the lots is traveling, the fork has to not be increased too expensive, which will certainly impact the stability of the forklift. .
3. After dumping, the fork needs to be reduced to the typical driving position prior to driving. .
4. When turning, if there are pedestrians or automobiles close by, the driving signal must be released initially. High-speed sharp turns are prohibited. High-speed sharp turns will trigger the vehicle to lose side security and tip over. .
5. When the forklift is downhill, it is strictly forbidden to shut off the fire and slide, and it is prohibited to brake unexpectedly while driving with lots unless there are unique conditions.
6. When the forklift is running, it should comply with the traffic rules in the factory and need to maintain a particular safety distance from the vehicle in front. .
7. When the forklift is running, the tons must be in the most affordable position that does not hinder the driving, and the gantry needs to be appropriately slanted back. The load shall not be elevated other than when piling or filling. .
8. The elevation of the tons need to not block the chauffeur's view. In unique circumstances, when the item affects the forward vision, drive at a reduced speed when reversing.
9. It is restricted to turn on the ramp, neither to drive across the ramp. .
10. The safe driving speed of the forklift in the factory area is 5 km/h, and it needs to drive securely at a reduced rate when getting in the production workshop area. .
11. When the forklift is lifted, raised or driven, it is prohibited for personnel to depend on the fork to hold things and play a stabilizing function. .
12. If problems are found, they will certainly be fixed and reported in a prompt manner, and they will certainly never ever run with illnesses or conceal them.

loading and unloading.
1. When fork-loading items, the range between both forks must be changed as required to make the lots of the two forks well balanced and not manipulated, and one side of the thing should be against the rack. .
2. It is forbidden to work with a single fork or use a fork top or draw. In special circumstances, safety and security indication must be established to remind bordering pedestrians. .
3. In the process of packing Electric Forklift Truck for Warehouse and dumping products, the forklift must be stopped with the brake. .
4. The speed of the automobile ought to be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and harm individuals. .
5. When using a fork to fork the goods, the fork needs to be as deep as possible under the tons, and it should be kept in mind that the fork pointer ought to not touch various other goods or items. The lots ought to be maintained with minimal back tilt of the gantry to make sure that the load does not move in reverse. The mast can be tilted onward slightly when the tons is decreased to allow for easy positioning of the lots and extraction of the forks. .
6. It is prohibited to fork Stand-on Electric Pallet Stacker items at broadband and collide with difficult things with the fork head. .
7. When the forklift is functioning, it is restricted for people to stand around the fork, so regarding stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is banned, and it is prohibited to use forks to lift workers to take part in high-altitude procedures to avoid high-altitude falling mishaps. .
9. It is not enabled to make use of the brake inertia to slide, place, round or roll things. .
10. It is not allowed to use forks to pick, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you have to dump the goods or reduced the fork structure.
2. Draw the parking brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for special circumstances, such as the driver does not leave the vehicle's line of sight and does not exceed 1 minute).
4. Remove the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be inspected, and fuel, lubricating oil and air conditioning water need to be included.
2. Inspect the security performance of starting, running and stopping.
3. Examine whether the lights and horn signals are total and efficient.
4. During the procedure of the forklift, examine whether the stress and temperature are normal.
5. After the forklift is running, the exterior leak ought to also be checked and the seals need to be changed in time.

Forklift Safety Operation Specifications.
1. You should check prior to leaving the auto;.
2. When you come across somebody in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be as well sharp to prevent the propensity of " complimentary turning";.
6. Adding and down the slope needs to be sluggish and consistent, and no switching on the slope is enabled.
7. Do not drive across the slope. When the gradient is above 10%, the car needs to be driven backwards when worsening;.
8. When the forklift workers lug the goods and progress, if they encounter big or hefty products and most likely to the chauffeur's view, they ought to take the turning around exercise
.
The "Eight Prohibitions" must be followed in the operation.
1. Solitary fork operation is not enabled.
2. It is not permitted to lift the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It is not enabled to make use of inertia pressure to pick up the goods.
6. It is not enabled to make use of braking force to expatriation round or easy-to-roll things.
7. It is not enabled to bring people to work with the pallet or fork, and it is purely prohibited to stand under the fork after the fork is elevated.
8. Do not drive laterally on inclines
.
Auto parking is not permitted under the list below problems.
1. Curves, narrow roadways, railway crossings;.
2. Sections with a longitudinal slope greater than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the section with the same length as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844